| 电流处理对Al-Si合金定向凝固组织的影响 |
| |
| 引用本文： | 万刚,武保林,王洪顺,赵玉华.电流处理对Al-Si合金定向凝固组织的影响[J].铸造,2004,53(12):1001-1004. |
| |
| 作者姓名： | 万刚 武保林 王洪顺 赵玉华 |
| |
| 作者单位： | 沈阳航空工业学院材料工程系,辽宁,沈阳,110034 |
| |
| 摘 要： | 通过对不同种Al-Si合金所进行的不同拉伸速度、改变合金成分以及对不同成分合金施加交流电处理的定向凝固,研究了在上述不同工艺条件下Al-Si合金定向凝固组织的变化.结果表明,拉伸速度为3mm/min时定向凝固现象最明显,硅含量和电流处理对晶体生长方式有较大的影响,并分析了拉伸速度、合金成分和电流对Al-Si合金定向凝固组织的影响机理.
|
| 关 键 词： | Al-Si合金 拉伸速度 Si含量 电流 |
| 文章编号： | 1001-4977(2004)12-1001-04 |
| 修稿时间： | 2004年4月26日 |
Influence of Current Treatment on Al-Si Alloys Directional Solidification Structure |
| |
| WAN Gang,WU Bao-lin,WANG Hong-shun,ZHAO Yu-hua.Influence of Current Treatment on Al-Si Alloys Directional Solidification Structure[J].Foundry,2004,53(12):1001-1004. |
| |
| Authors: | WAN Gang WU Bao-lin WANG Hong-shun ZHAO Yu-hua |
| |
| Abstract: | The directional solidification of Al-Si alloys under different conditions was studied in this paper, and these conditions include different alloy components, different tension velocities and applying alternate current. The experiment results show that the directional solidification phenomenon is most obvious when its tension velocity is 3mm/min, and the Si content has effect on growth mode significantly, so does alternate current treatment. Other more, these influence mechanism were discussed too. |
| |
| Keywords: | Al-Si alloys tension velocity Si content current |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
