| Abstract: | Interpenetrating networks (IPNs) of novolac (phenol formaldehyde) resin and poly(butyl acrylate) (PBA) were prepared by a sequential mode of polymerization. Both full IPNs and semi‐IPNs of different compositions were synthesized and characterized with respect to their mechanical properties, that is, their modulus, ultimate tensile strength (UTS), elongation‐at‐break percentage, and toughness. Their thermal properties were examined with differential scanning calorimetry and thermogravimetric analysis (TGA). A morphological study was performed with an optical microscope. The effects of the variation of the blend ratios on the aforementioned properties were studied. There was a gradual decrease in the modulus and UTS with a simultaneous increase in the elongation‐at‐break percentage and toughness for both types of IPNs as the proportions of PBA were increased. With increasing proportions of PBA, the glass‐transition temperatures of the different IPNs underwent shifts toward a lower temperature region. This showed a plasticizing influence of PBA on the rigid and brittle phenolic matrix. TGA thermograms depicted the classical two‐step degradation for the phenolic resin. Although there was an apparent increase in the thermal stability at the initial stage (up to 350°C), particularly at lower temperatures, a substantial decrease in the thermal stability was observed at higher temperatures under study. In all the micrographs of full IPNs and semi‐IPNs, two‐phase structures were observed, regardless of the PBA content. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2407–2417, 2005 |
