| Abstract: | A superabsorbent of starch, 2‐acrylamido‐2‐methyl‐propanosulfonic acid (AMPS), and sodium acrylate was synthesized by microwave irradiation, and the effect of AMPS on the performance of the polymer was investigated. The best mass fraction of the three components was determined (starch/acrylic acid/AMPS = 2 : 5 : 3). The structure of the polymer was characterized by Fourier transform infrared, 13C cross‐polarization/magic‐angle spinning NMR, and scanning electron microscopy, and the morphology of the surface of the sample was studied. The results showed that the morphology of the polymer was changed to some extent under microwave irradiation, and the swelling rate of the polymer synthesized by microwave polymerization was faster than the swelling rate of a polymer synthesized by a traditional method. The best absorbent capacities of the product in distilled water and a 0.9% sodium chloride solution were 450 and 53 g/g, respectively. Meanwhile, the introduction of AMPS to a superabsorbent resin was an effective method for improving the performance of the polymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1050–1054, 2005 |
