| 工艺参数对回转水纺制锡铅丝状钎料的影响 |
| |
| 引用本文： | 陈翌庆,王建民.工艺参数对回转水纺制锡铅丝状钎料的影响[J].热加工工艺,1994(4):22-24. |
| |
| 作者姓名： | 陈翌庆 王建民 |
| |
| 作者单位： | 合肥工业大学 |
| |
| 摘 要： | 提出了一种从熔体中直接纺制丝状合钎料的新方法一回转水纺制丝状合金钎料法，纺制成了φ０．１－０．１５ｍｍ的ＨＬ６１０锡铅丝状钎料，并详细分析了主要工艺参数对纺丝质量的影响。
|
| 关 键 词： | 回转水纺制 锡铅合金 丝状钎料 |
The Influence of Technological Parameters on the Formation of Sn-Pb Filamentary Brazing Filler Alloys Made By In- Rotating-Water Spinning |
| |
| Chen Yiqing,Wang Jianmin,Xu Yunxiang, Zhang Lianfang.The Influence of Technological Parameters on the Formation of Sn-Pb Filamentary Brazing Filler Alloys Made By In- Rotating-Water Spinning[J].Hot Working Technology,1994(4):22-24. |
| |
| Authors: | Chen Yiqing Wang Jianmin Xu Yunxiang Zhang Lianfang |
| |
| Affiliation: | Chen Yiqing;Wang Jianmin;Xu Yunxiang; Zhang Lianfang |
| |
| Abstract: | A new in- rotating-water spinning process to produce the filamentary brazing filler alloys directly from mclten metal has been put forward. The filamentary HL610 brazing filler alloy with the diameter from 0. 1 to 0.15mm has been made by this way. Effect of technological parameters on spinning qualities of the filaments has been analysed in detail. |
| |
| Keywords: | in-rotating-water spinning filamentary brazing filler alloy Sn-Pb alloy tecnological parameter |
| 本文献已被 CNKI 维普 等数据库收录！ |
