Sonochemical Combined Synthesis of Nickel Ferrite and Cobalt Ferrite Magnetic Nanoparticles and Their Application in Glycan Analysis

The combination of the sonochemical activation of Ni(NO₃)₂ and Co(NO₃)₂ in the presence of Fe(NO₃)₃ and polyethylene glycol and consecutive heat treatment of the formed metal hydroxides offers a cheap and efficient method for the preparation of nickel ferrite and cobalt ferrite magnetic nanoparticles, which can be successfully applied in the selective capture of fluorescently derivatized N-glycans from human serum. XRD measurement revealed that, besides the ferrite phase, nickel and cobalt oxides also form during heat treatment. The amount of simple metal oxides can be well controlled by the temperature of the heat treatment, since increasing temperature yielded higher spinel content. For both nickel and cobalt, the best heat treatment temperature was found to be 673 K, where the samples contained 84.1% nickel ferrite, and in the case of cobalt, almost pure (99.6%) cobalt ferrite could be prepared. FT-IR and zeta potential measurements indicated the presence of surface OH groups, which aided in the dispersion of the particles in water and, in addition, can promote the adsorption of polar compounds. The practical applicability of the magnetic nanopowders was demonstrated in the purification of fluorescently derivatized N-glycans (from human serum). Cobalt ferrite was found to be the most effective. Owing to the easy preparation and the simplicity of the magnetic separation the pure cobalt ferrite, magnetic nanoparticles could be efficient tools for the selective enrichment of serum N-glycans in HPLC measurements.