| 一种X射线成像系统模型及其快速标定方法 |
| |
| 引用本文： | 田原,都东,侯润石,高志凌,申立群. 一种X射线成像系统模型及其快速标定方法[J]. 焊接学报, 2007, 28(7): 25-28 |
| |
| 作者姓名： | 田原 都东 侯润石 高志凌 申立群 |
| |
| 作者单位： | 1. 清华大学,机械工程系,北京,100084
2. 中国华油钢管有限公司,河北,青县,062650 |
| |
| 基金项目： | 教育部高等学校博士学科点专项科研基金 |
| |
| 摘 要： | 利用X射线进行工件内部缺陷检测是目前应用最广泛的无损检测方法之一,基于图像处理的自动检测技术是其主要发展方向.系统成像模型的建立和标定确定了成像目标与其图像之间的几何对应关系,是利用图像进行自动定位与测量的前提.在忽略一些非线性因素如图像增强器输入屏形状等的情况下,针对用于大直径螺旋钢管焊缝缺陷自动检测的射线成像系统,提出一种简便、可操作性强的方法进行建模并进行标定,结果表明了所采用方法的有效性.
|
| 关 键 词： | 射线检测 焊缝缺陷 成像模型 标定 |
| 文章编号： | 0253-360x（2007）07-025-04 |
| 收稿时间： | 2006-08-16 |
| 修稿时间： | 2006-08-16 |
An imaging model for X-ray system and its calibration method |
| |
| TIAN Yuan,DU Dong,HOU Runshi,GAO Zhiling and SHEN Liqun. An imaging model for X-ray system and its calibration method[J]. Transactions of The China Welding Institution, 2007, 28(7): 25-28 |
| |
| Authors: | TIAN Yuan DU Dong HOU Runshi GAO Zhiling SHEN Liqun |
| |
| Affiliation: | Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China,Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China,Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China,Petroleum Steel Pipe Co., Ltd, Qingxian 062650, Hebei, China and Petroleum Steel Pipe Co., Ltd, Qingxian 062650, Hebei, China |
| |
| Abstract: | It''s one of the most extensive methods to inspect workpiece with X-ray and automatic inspection based on image processing is an important field. The imaging model and calibration establish a geometrical relationship between workpiece and its image, which is the precondition for automatic orientation and measurement with images. Ignored some factors such as the shape of the image intensifier''s input screen, the paper develops a model and calibration method for the imaging system used in automatic nondestructive testing system, which is used in weld defect inspection. The results show that the method is effective. |
| |
| Keywords: | inspection with X-ray weld defect imaging model calibration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
|
