首页 | 本学科首页   官方微博 | 高级检索  
     

Ti40Zr25Ni15Cu20非晶钎料钎焊Si3N4陶瓷的界面结构及强度
引用本文:邹家生,赵宏权,蒋志国. Ti40Zr25Ni15Cu20非晶钎料钎焊Si3N4陶瓷的界面结构及强度[J]. 焊接学报, 2007, 28(3): 45-48
作者姓名:邹家生  赵宏权  蒋志国
作者单位:江苏科技大学,先进焊接技术省级重点实验室,江苏,镇江,212003
基金项目:江苏省高校自然科学基金
摘    要:采用Ti40Zr25Ni15Cu20非晶钎料进行了Si3N4陶瓷真空钎焊连接,利用SEM、EDX等微观分析手段,研究了钎焊界面的微观结构,得出界面反应层有两部分组成,接头界面微观结构为Si3N4/TiN/Ti-Si,Zr-Si化合物/钎缝中心;在相同钎焊工艺条件下,研究对比了晶态和非晶态钎料钎焊接头的强度,发现非晶态钎料钎焊的接头强度大大超过用晶态钎料钎焊的接头.

关 键 词:非晶钎料  Si3N4陶瓷  界面结构  连接强度
文章编号:0253-360X(2007)03-045-04
收稿时间:2006-04-19
修稿时间:2006-04-19

Microstructure and strength of Si3N4 joint brazed with Ti40Zr25Ni15Cu20 amorphous brazing alloy
ZOU Jiasheng,ZHAO Hongquan and JIANG Zhiguo. Microstructure and strength of Si3N4 joint brazed with Ti40Zr25Ni15Cu20 amorphous brazing alloy[J]. Transactions of The China Welding Institution, 2007, 28(3): 45-48
Authors:ZOU Jiasheng  ZHAO Hongquan  JIANG Zhiguo
Affiliation:Provincial Key Laboratory of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, China,Provincial Key Laboratory of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, China and Provincial Key Laboratory of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003, Jiangsu, China
Abstract:Si3N4 ceramic is brazed with Ti40Zr25Ni15Cu20 amorphous filler metal,and the effect of brazing parameter on interfacial microstructure and joint strength was discussed.The interfacial microstructure is composed of two parts which are TiN and Ti-Si,Zr-Si compound respectively with the SEM,EDX etc.Under the same experiments conditions,the joint strength brazed with amorphous filler metal increased a lot compared with the crystalline.
Keywords:Ti-Zr-Ni-Cu brazing filler metal  amorphous filler metal  Si3N4 ceramic  interfacial microstructure  bonding strength
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号