| 基于滚齿仿真的齿轮三维建模的研究与实现 |
| |
| 引用本文： | 叶红朝,孙毅. 基于滚齿仿真的齿轮三维建模的研究与实现[J]. 机床与液压, 2007, 35(12): 74-76 |
| |
| 作者姓名： | 叶红朝 孙毅 |
| |
| 作者单位： | 浙江机电职业技术学院,浙江杭州,310053;浙江机电职业技术学院,浙江杭州,310053 |
| |
| 摘 要： | 提出了一种采用滚齿仿真来构建齿轮三维模型的新方法.在AutoCAD中,通过ActiveX Automation 开发技术,采用单齿槽建模的方法,成功实现了齿轮精确的三维造型.该方法提高了齿轮三维建模的效率与精度,并为齿轮的滚刀设计和有限元分析提供了理论依据.
|
| 关 键 词： | 滚齿仿真 范成法 齿轮 三维建模 |
| 文章编号： | 1001-3881（2007）12-074-3 |
| 收稿时间： | 2007-01-11 |
| 修稿时间： | 2007-01-11 |
Research and Application of 3D Modeling of Gear Based on Gear-hobbing Simulation |
| |
| YE Hongzhao,SUN Yi. Research and Application of 3D Modeling of Gear Based on Gear-hobbing Simulation[J]. Machine Tool & Hydraulics, 2007, 35(12): 74-76 |
| |
| Authors: | YE Hongzhao SUN Yi |
| |
| Abstract: | A new method of 3D modeling of gear by gear- hobbing simulation was presented. Based on AutoCAD ActiveX Automation technique, 3D modeling of gear was realized accurately through single gear slot modeling. This approach can improve 3D modeling efficiency and precision of gear, which provides theory basis for gear hob design and finite method analysis of gear. |
| |
| Keywords: | Gear-hobbing simulation Generating cutting Gear 3D modeling |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
