Fabrication of novel sol-gel silica coatings reinforced with multi-walled carbon nanotubes

Novel sol-gel silica coatings reinforced with multi-walled carbon nanotubes (MWCNTs) have been prepared using the organic sol-gel route and the dip-coating technique on magnesium alloy substrates. Homogeneous and dense composite coatings with good reinforcement dispersion were fabricated using low temperature and atmospheric pressure fabrication conditions. The presence of nanotubes caused a substantial enhancement of silica coating fracture toughness on coatings deposited on grounded substrates but it was not as effective on polished substrates because of the low adhesion of the coating to the substrate. Bridging phenomena caused by the MWCNTs was observed, indicating that an effective load transfer between the silica matrix and the nanotube reinforcement was also achieved.