首页 | 本学科首页   官方微博 | 高级检索  
     

熔模铸件孤立热节热型壳局部水淬试验
引用本文:刘学庆,李磊,李传路,刘作宝,许云祥.熔模铸件孤立热节热型壳局部水淬试验[J].特种铸造及有色合金,2003(2):50-51.
作者姓名:刘学庆  李磊  李传路  刘作宝  许云祥
作者单位:1. 蓬莱金创精铸阀业有限公司
2. 中国科学技术大学
摘    要:对熔模铸件孤立热节热型壳进行了浇注前及浇注后局部水淬激冷试验。试验结果表明,浇注前热型壳局部水淬能有效提高铸件孤立热节处的凝固冷却速度,有效防止热节处产生缩孔(松),而浇注后铸件型壳组局部水淬虽也能有效防止孤立热节处产生缩孔(松),但由于水淬时产生大量水气的内侵而形成大量麻点、麻坑类铸造缺陷。

关 键 词:精密铸造  孤立热节  水淬
文章编号:1001-2449(2003)02-0050-02
修稿时间:2002年12月10

Experiments for Hot Mold Shell with Isolated Hot spot by Local Water Quenching in Investment Casting
Liu Xueqing,Li Lei,Li Chuanlu,Liu Zuobao.Experiments for Hot Mold Shell with Isolated Hot spot by Local Water Quenching in Investment Casting[J].Special Casting & Nonferrous Alloys,2003(2):50-51.
Authors:Liu Xueqing  Li Lei  Li Chuanlu  Liu Zuobao
Abstract:Experiments for hot mold shell with isolated hot spot by local water quenching in investment casting before and after pouring were conducted. The results showed that hot mold shell by local water quenching can increase in solidifying rate of isolated hot spot effectively resulting in significant prevention from shrinkage hole(porosity) before pouring while it dose after pouring, but a large amount of vapors formed by water quenching was entrapped into casting, resulting in generating a lot of mottle spots or mottled caves after pouring.
Keywords:Investment Casting  Isolated Hot Spot  Water Quenching
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号