| 基于PLC的柴油机大小涡轮相继增压控制系统设计 |
| |
| 引用本文： | 李先南,王银燕,杨传雷,王贺春.基于PLC的柴油机大小涡轮相继增压控制系统设计[J].测控技术,2012,31(10):73-76. |
| |
| 作者姓名： | 李先南 王银燕 杨传雷 王贺春 |
| |
| 作者单位： | 哈尔滨工程大学动力与能源工程学院,黑龙江哈尔滨,150001 |
| |
| 摘 要： | 设计了TBD234V12柴油机大小涡轮三区相继增压控制系统.以西门子S7-300系列PLC为核心构建控制系统的硬件配置,用STEP 7软件编写控制程序来满足柴油机大小涡轮相继增压系统的控制要求,其主要控制参数为切换转速和切换延迟.用组态王(KingView)软件设计控制系统的监控界面.经调试运行表明,基于PLC的柴油机大小涡轮相继增压控制系统安全可靠.
|
| 关 键 词： | 柴油机 相继增压 可编程序逻辑控制器 组态王 |
Design of Sequential Turbocharging Control System for Diesel Engine with Two Unequal Turbochargers Based on PLC |
| |
| LI Xian-nan
,
WANG Yin-yan
,
YANG Chuan-lei
,
WANG He-chun.Design of Sequential Turbocharging Control System for Diesel Engine with Two Unequal Turbochargers Based on PLC[J].Measurement & Control Technology,2012,31(10):73-76. |
| |
| Authors: | LI Xian-nan WANG Yin-yan YANG Chuan-lei WANG He-chun |
| |
| Abstract: | A three staged sequential turbocharging control system of the TBD234V12 diesel engine is designed.The PLC of SIMENS S7 300 series is used as the core to build hardware configuration of the control system.To satisfy the requirements of three staged sequential turbocharging control system,STEP 7 software development control procedures are applied,which mainly controls semesters to switch velocity and delay.The monitoring interface of the control system is designed by KingView software.The debugging and running of the control system proves that the three staged sequential turbocharging control system of diesel engine based on PLC is safe and reliable. |
| |
| Keywords: | diesel engine sequential turbocharging PLC KingView |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《测控技术》浏览原始摘要信息 |
|
点击此处可从《测控技术》下载全文 |
|
