| 轧制方式对超薄取向硅钢带性能的影响 |
| |
| 引用本文： | 高秀华,齐克敏,邱春林,崔玉所,白光润,李四军. 轧制方式对超薄取向硅钢带性能的影响[J]. 钢铁研究学报, 2001, 13(5): 48-50 |
| |
| 作者姓名： | 高秀华 齐克敏 邱春林 崔玉所 白光润 李四军 |
| |
| 作者单位： | 1. 东北大学轧制技术及连轧自动化国家重点实验室,辽宁 沈阳 110006
2. 本溪冶金专科学校冶金系,辽宁 本溪 117022 |
| |
| 基金项目： | 国家自然科学基金资助项目 ( 5 96 710 37) |
| |
| 摘 要： | 采用同步、异步、同步与异步组合等多种轧制方法，将0．30mm厚的取向硅钢带（工业成品）冷却到0．10mm以下，在纯氢气炉中进行再结晶退火。研究了不同轧制方式对硅钢薄带磁性能的影响规律，结果表明，异步轧制可有效地减少轧制道次，并有利于改善硅钢薄带的织构和磁性能。
|
| 关 键 词： | 异步轧制 硅钢 磁性能 织构 |
| 文章编号： | 1001-0963(2001)05-0048-03 |
| 修稿时间： | 2000-11-15 |
Effect of Rolling Method on Magnetic Property of Super-Thin Grain Oriented Silicon Steel Sheet |
| |
| GAO Xiu hua ,QI Ke min ,QIU Chun lin ,CUI Yu suo ,BAI Guang run ,LI Si jun. Effect of Rolling Method on Magnetic Property of Super-Thin Grain Oriented Silicon Steel Sheet[J]. Journal of Iron and Steel Research, 2001, 13(5): 48-50 |
| |
| Authors: | GAO Xiu hua QI Ke min QIU Chun lin CUI Yu suo BAI Guang run LI Si jun |
| |
| Affiliation: | GAO Xiu hua 1,QI Ke min 1,QIU Chun lin 1,CUI Yu suo 1,BAI Guang run 1,LI Si jun 2 |
| |
| Abstract: | The commercial grain oriented silicon steel 0.30 mm thick was cold rolled to thinner than 0.10 mm by different rolling methods respectively, then annealed in a pure hydrogen atmosphere furnace. The influence of the rolling method on the magnetic properties of thin silicon steel sheets was investigated. The results indicated that the asynchronous rolling is effective to decrease rolling passes and improve the rolled texture and magnetic properties of thin silicon steel sheets. |
| |
| Keywords: | asynchronous rolling silicon steel magnetic property texture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
