| 用保角映射法求解多层套扁挤压筒内的应力 |
| |
| 引用本文： | 王匀,刘全坤.用保角映射法求解多层套扁挤压筒内的应力[J].机械工程学报,2005,41(10):80-83. |
| |
| 作者姓名： | 王匀 刘全坤 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院 |
| |
| 基金项目： | 国家自然科学基金资助项目(50075022)。 |
| |
| 摘 要： | 生产大型铝型材用扁挤压筒内孔近似椭圆，属多连通域，难以采用常规的单连体平面问题的复变函数保角映射法，应力求解困难。结合单连体复变函数法和留数定理给出了受内压扁挤压筒的应力求解公式和例子，并与有限元模拟结果进行了比较分析。结果表明理论解和数值解在全域范围内基本一致，从而解决了保角映射法应用于扁挤压筒实际工程应力计算的主要障碍，为模具强度设计提供了依据。
|
| 关 键 词： | 保角映射 扁挤压筒 解析解 数值解 应力 |
| 修稿时间： | 2004年11月15 |
STRESS CALCULATION OF FLAT CONTAINER BY CONFORMAL MAPPING METHOD |
| |
| Wang Yun,Liu Quankun.STRESS CALCULATION OF FLAT CONTAINER BY CONFORMAL MAPPING METHOD[J].Chinese Journal of Mechanical Engineering,2005,41(10):80-83. |
| |
| Authors: | Wang Yun Liu Quankun |
| |
| Affiliation: | College of Materials Science and Engineering, Hefei University of Technology |
| |
| Abstract: | Flat container is used to extrude large aluminum profiles. Because of the inner-hole geometry of flat container is approximate to ellipse, it is difficult to apply conventional conformal mapping method of single-connect region to stress calculation. The stress calculation formula and example of pressed flat container are given through complex function of single-connect region and residue theory. By the comparison with simulated result obtained by analysis, it shows that the theoretic solution is in good accord with numerical solution and conformal mapping method can be applied to practical stress calculation of flat container. Furthermore, the method gives support to the design of flat container. |
| |
| Keywords: | Conformal mapping Flat container Stress Theoretic solution Numerical solution |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机械工程学报》浏览原始摘要信息 |
|
点击此处可从《机械工程学报》下载全文 |
