| 镁合金轮毂低压铸造数值模拟及缺陷预测 |
| |
| 引用本文： | 朱阳.镁合金轮毂低压铸造数值模拟及缺陷预测[J].铸造技术,2011,32(5). |
| |
| 作者姓名： | 朱阳 |
| |
| 作者单位： | 台州广播电视大学,浙江,台州,318000;浙江工业大学特种装备制造与先进加工技术教育部/浙江省重点实验室,浙江,杭州,310014 |
| |
| 基金项目： | 浙江省重中之重学科"先进制造技术与装备"开放基金 |
| |
| 摘 要： | 以某镁合金汽车轮毂为研究时象,运用专业铸造模拟分析软件,进行低压铸造数值模拟,研究了填充和凝固过程中温度场的分布,预测了在此过程可能出现的缺陷.模拟结果显示.轮毂中心部位也可能产生缩松,并发现通过降低或者提高充型速度并不能有效解决问题,通过在模具上模增加局部冷却水道,能够较好地改善整体冷却顺序,有效减小轮毂中心的缩松现象.
|
| 关 键 词： | 镁合金轮毂 低压铸造 数值模拟 |
Numerical Simulation and Defect Prediction of Low Pressure Die Casting of Magnesium Alloy Wheel Hub |
| |
| ZHU Yang.Numerical Simulation and Defect Prediction of Low Pressure Die Casting of Magnesium Alloy Wheel Hub[J].Foundry Technology,2011,32(5). |
| |
| Authors: | ZHU Yang |
| |
| Affiliation: | ZHU Yang1,2(1.Taizhou Radio & TV University,Taizhou 318000,China,2.Key Laboratory of E&M,Ministry of Education & Zhejiang Province,Zhejiang University of Technology,Hangzhou 310014,China) |
| |
| Abstract: | The simulation of low pressure die casting process of a magnesium alloy wheel hub was practiced.Using professional casting software,the temperature field during filling and solidification process,and then the potential defects were predicted and previewed.Based on analysis,it was found that there would be shrinkage defects at the center of wheel hub.And this shrinkage can not be eliminated by reducing the pouring velocity.But through setting cooling pipe system in the top mold alone is a valid way to enhanc... |
| |
| Keywords: | Magnesium alloy wheel hub Low pressure die-cast Numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
