| 铸造随流孕育装置用可调下料管总成设计 |
| |
| 引用本文： | 段华荣,周存堂,蒋家强,刘文曾.铸造随流孕育装置用可调下料管总成设计[J].铸造技术,2011,32(5). |
| |
| 作者姓名： | 段华荣 周存堂 蒋家强 刘文曾 |
| |
| 作者单位： | 1. 中国一拖集团有限公司工艺材料研究所,河南,洛阳,471004
2. 中国一拖集团有限公司(洛阳)铸锻有限公司二铁厂,河南,洛阳,471004 |
| |
| 摘 要： | 设计提供的随流孕育装置用可调下料管总成,不仅能够满足其下料管出口指向的空间转角调整,及适度加长下料管长度的需要,而且能够满足多浇口铸型砂箱需适时调整下料管出口指向,及在手工浇注造型线上设置随流孕育装置时,要求下料管总成能够一起随行的配备要求,并且结构简单、实施方便.本总成已于2008年获国家实用新型专利授权.
|
| 关 键 词： | 随流孕育装置 可调下料总成 设计 |
Design of a Tunable Blanking Tube Assembly for Stream Inoculation Device in Casting |
| |
| DUAN Hua-rong,ZHOU Can-tang,JIANG Jia-qiang,LIU Wen-zeng.Design of a Tunable Blanking Tube Assembly for Stream Inoculation Device in Casting[J].Foundry Technology,2011,32(5). |
| |
| Authors: | DUAN Hua-rong ZHOU Can-tang JIANG Jia-qiang LIU Wen-zeng |
| |
| Affiliation: | DUAN Hua-rong1,ZHOU Cun-tang1,JIANG Jia-qiang2,LIU Wen-zeng1(1.Technology and Material Institute of YTO Group Corporation,Luoyang 471004,China,2.The Second Cast Iron Plant of YTO(Luoyang) Casting & Forging Co.,Ltd.,China) |
| |
| Abstract: | This article designs a tunable blanking tube assembly for stream inoculation device,not only can meet the requriment for ajusting space angle and length of the blanking tube,but also can meet the requriment for multiple pin-point gates mould flask to adjust direction of blanking tube outlet and tube assembly traveling when stream inoculation device installated in hand-cast model,and simple structure,easy to implement,has popularization value.This assembly has obtained China National practical new-type paten... |
| |
| Keywords: | Stream Inoculation device Tunable Blanking Tube Assembly Design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
