| 三次NURBS样条曲线插补加工螺旋转子建模与加工研究 |
| |
| 引用本文： | 余道洋,韩江,夏链. 三次NURBS样条曲线插补加工螺旋转子建模与加工研究[J]. 制造技术与机床, 2011, 0(3) |
| |
| 作者姓名： | 余道洋 韩江 夏链 |
| |
| 作者单位： | 合肥工业大学机械与汽车工程学院,安徽,合肥,230009 |
| |
| 摘 要： | 提出在螺旋转子加工制造过程中,采用三次NURBS样条曲线插补替代通常的微直线段插补;建立了螺旋转子端面摆线段三次NURBS样条曲线方程.在Pro/E软件上比较了三次样条插补曲线和理论摆线之间的精度误差.最后通过在立式加工中心上比较了采用三次NURBS样条插补和采用微直线段插补的加工精度和加工效率,采用三次NURBS样条插补加工取得了理想的效果.
|
| 关 键 词： | 三次NURBS样条曲线 微直线段 摆线 加工效率 |
Modeling and machining research of cubic NURBS spline curve interpolation processing helical rotor |
| |
| YU Daoyang,HAN Jiang,XIA Lian. Modeling and machining research of cubic NURBS spline curve interpolation processing helical rotor[J]. Manufacturing Technology & Machine Tool, 2011, 0(3) |
| |
| Authors: | YU Daoyang HAN Jiang XIA Lian |
| |
| Affiliation: | YU Daoyang,HAN Jiang,XIA Lian(School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,CHN) |
| |
| Abstract: | In this paper,during the spiral rotor manufacturing process,the cubic NURBS spline curve interpolation replaces the usual micro-straight line interpolation;establishes the cubic NURBS spline curve equation of the helical rotor's end cycloid curve.It compares precision error between the cubic spline interpolation curve and the theoretical cycloid in the Pro/E software.Finally,comparing machining accuracy and machining efficiency by using the cubic NURBS spline interpolation and micro-straight line interpolat... |
| |
| Keywords: | Cubic NURBS Spline Curve Micro-straight Line Cycloid Machining Efficiency |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
