| 弯曲铁芯多工位级进模设计 |
| |
| 引用本文： | 钱国强. 弯曲铁芯多工位级进模设计[J]. 模具工业, 2002, 0(6): 14-15,29 |
| |
| 作者姓名： | 钱国强 |
| |
| 作者单位： | 华渊电机(江苏)有限公司,江苏吴江,215200 |
| |
| 摘 要： | 从弯曲铁芯的排样、模具结构、主要模具零部件设计等几方面介绍了弯曲铁芯多工位级进模的设计
|
| 关 键 词： | 弯曲铁芯 级进模 设计 |
| 文章编号： | 1001-2168(2002)06-0014-03 |
Design of the Multi-Position Progressive Die for the Bent Iron Core |
| |
| QIAN Guo-qiang. Design of the Multi-Position Progressive Die for the Bent Iron Core[J]. Die & Mould Industry, 2002, 0(6): 14-15,29 |
| |
| Authors: | QIAN Guo-qiang |
| |
| Abstract: | The design of the multi-position progressive die for the bent iron core was introduced from the aspects of the layout of the bent core, the structure of the die and the design of the main parts of the die. |
| |
| Keywords: | bent iron core progressive die design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
