| 程序化计算端面移动量在多楔模具参数化设计上的应用 |
| |
| 引用本文： | 束学道,邢希东,胡正寰.程序化计算端面移动量在多楔模具参数化设计上的应用[J].冶金设备,2003(6):6-9. |
| |
| 作者姓名： | 束学道 邢希东 胡正寰 |
| |
| 作者单位： | 1. 北京科技大学机械工程学院,北京,100083
2. 北京科技大学机械工程学院,北京,100083;山东理工大学机械工程学院,淄博,255091 |
| |
| 基金项目： | 国家自然科学青年基金资助项目 (5 0 2 0 5 0 0 4) |
| |
| 摘 要： | 精确地计算出楔横轧轧制过程中轧件端面移动量 ,对于楔横轧多楔模具设计合理确定楔与楔之间的相对位置起着至关重要的作用。在综合楔横轧轧制过程不同阶段端面移动量计算规律的基础上 ,开发并编制出楔横轧端面移动量计算机源程序 ,并应用于楔横轧多楔模具参数化设计。通过实际轧制实验证明 ,该程序计算结果正确、计算效率高 ,为楔横轧多楔模具参数化设计提供了良好的前处理通用程序
|
| 关 键 词： | 楔横轧 多楔 端面移动量 |
| 修稿时间： | 2003年8月15日 |
Calculating Movement of the End of Rolled Part by Program and Its Application in Designing Multi-Wedge Mould by Parameters |
| |
| Shu Xuedao,Xing Xidong,Hu Zhenghuan.Calculating Movement of the End of Rolled Part by Program and Its Application in Designing Multi-Wedge Mould by Parameters[J].Metallurgical Equipment,2003(6):6-9. |
| |
| Authors: | Shu Xuedao Xing Xidong Hu Zhenghuan |
| |
| Abstract: | How to calculate accurately movement of the end of rolled part in cross wedge rolling, it is extremely important to confirm correctly relative position among wedges and wedges for designing multi-wedge mould in cross wedge rolling. Based on synthesizing rules movement of the end of rolled part in different stages about cross wedge rolling, the source program to calculate movement of the end of rolled part has been developed. In the mean time, this program is applied to design multi-wedge mould by parameters too. By practical rolling experiment, this program is proved that it has correct calculated result and higher calculating efficiency. It can provide better general program of fore treatment for designing multi-wedge mould by parameters. |
| |
| Keywords: | Cross wedge rolling Multi-wedge Move of the end of rolled part |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
