| 工业CT在粉末注射成形中的应用 |
| |
| 引用本文： | 何新波,方伟,许均力,贾成厂,曲选辉.工业CT在粉末注射成形中的应用[J].粉末冶金材料科学与工程,2011,16(3):418-424. |
| |
| 作者姓名： | 何新波 方伟 许均力 贾成厂 曲选辉 |
| |
| 作者单位： | 北京科技大学材料科学与工程学院; |
| |
| 基金项目： | 国家自然科学基金重点资助项目(50634010); 国家重点基础研究发展规划(973计划)资助项目(2011CB606306) |
| |
| 摘 要： | 利用工业CT(ICT)研究粉末注射成形坯内部的密度分布,并重点研究注射坯内气孔的形成规律.研究表明,注射坯中沿着喂料的流动方向,中间的密度较高:而在垂直于喂料的流动方向,两边的密度高于中间的密度.注射坯内部气孔的出现与注射参数关系密切:当注射压力小于50 MPa、注射温度高于180℃、体积流率高于70cm<'3>/s时...
|
| 关 键 词： | 注射成形 工业CT 注射参数 注射缺陷 质量控制 |
Application of industrial CT in powder injection molding |
| |
| HE Xin-bo,FANG Wei,XU Jun-li,JIA Cheng-chang,QU Xuan-hui.Application of industrial CT in powder injection molding[J].materials science and engineering of powder metallurgy,2011,16(3):418-424. |
| |
| Authors: | HE Xin-bo FANG Wei XU Jun-li JIA Cheng-chang QU Xuan-hui |
| |
| Affiliation: | HE Xin-bo,FANG Wei,XU Jun-li,JIA Cheng-chang,QU Xuan-hui (School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China) |
| |
| Abstract: | The industrial CT(ICT) was introduced to study the density distribution and formation of porosities in the green bodies from powder injection molding.It was found that the densities in middle part of green bodies were higher than other parts along the injection direction,and the density at edges were higher than those at middle along the direction perpendicular to the injection direction.The emergence of pores was related to the process parameters,and the probability of the emergence of pores increased as t... |
| |
| Keywords: | powder injection molding industrial CT process parameters defects quality inspection |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
