| 汽车发电机爪极闭式热锻一步成形工艺研究 |
| |
| 引用本文： | 杨程,赵升吨,章建军. 汽车发电机爪极闭式热锻一步成形工艺研究[J]. 锻压技术, 2011, 36(3): 14-19. DOI: 10.3969/j.issn.1000-3940.2011.03.003 |
| |
| 作者姓名： | 杨程 赵升吨 章建军 |
| |
| 作者单位： | 西安交通大学机械工程学院;西安建筑科技大学冶金工程学院; |
| |
| 基金项目： | 国家自然科学基金资助项目(50975222):“多场耦合条件下典型难成形板料可控拉深成形基础理论的研究” |
| |
| 摘 要： | 为了得到少无切削的爪极锻件,在对爪极零件传统成形工艺和零件结构分析的基础上,提出了爪极闭式热锻一步成形工艺及对应的模具.建立了关于该成形工艺的三维热力耦合有限元分析模型,并通过Deform-3D对其进行了热模拟,得到了变形过程的坯料变形、材料流动情况和载荷行程曲线,结果证明了爪极闭式热锻一步成形的可行性.
|
| 关 键 词： | 爪极 闭式热锻 热模拟 |
Study on single stage hot closed-die forging process of automobile alternator poles |
| |
| YANG Cheng,ZHAO Sheng-dun,ZHANG Jian-jun. Study on single stage hot closed-die forging process of automobile alternator poles[J]. Forging & Stamping Technology, 2011, 36(3): 14-19. DOI: 10.3969/j.issn.1000-3940.2011.03.003 |
| |
| Authors: | YANG Cheng ZHAO Sheng-dun ZHANG Jian-jun |
| |
| Affiliation: | YANG Cheng1,2,ZHAO Sheng-dun1,ZHANG Jian-jun2(1.School of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049,China,2.School of Metallurgical Engineering,Xi'an University of Architecture and Technology,Xi'an 710055,China) |
| |
| Abstract: | In order to get alternator poles forgings with less cutting work,based on the analysis of traditional forming technology and the structure of alternator poles,a single stage closed die hot forging process and forming tool-set of alternator poles were put forward.A 3-D coupled thermo-mechanical finite element model was created,which was analyzed by the software Deform-3D.The billet deformation,metal flow and forming load were obtained.The results show that the single closed die hot forging process of alterna... |
| |
| Keywords: | alternator poles closed die forging thermal simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
