| 环氧树脂表面化学镀镍层制备及结合力评价 |
| |
| 引用本文： | 靳鹏,董世运,张晓东,汪笑鹤.环氧树脂表面化学镀镍层制备及结合力评价[J].中国表面工程,2011,24(3):69-73. |
| |
| 作者姓名： | 靳鹏 董世运 张晓东 汪笑鹤 |
| |
| 作者单位： | 装甲兵工程学院再制造技术重点实验室,北京,100072 |
| |
| 摘 要： | 采用化学镀的方法在环氧树脂表面制备镍镀层。观察了镀层表面和横截面形貌,研究了温度对镀层的表面形貌、沉积速率和结合力的影响,以及镀液pH值对镀层质量和沉积速率的影响,并对镀层与基体的结合力进行了评价。结果表明,环氧树脂化学镀镍的沉积速率随温度的升高而增大,但温度不宜太高,温度太高会增大镀层内部应力,降低镀层结合力。最佳施镀温度为35℃,镀液的最佳pH值为10,制备的镀层表面平整、均匀致密,镀层沉积速率为12μm/h,镀层与基体的结合力可达22.06 N。
|
| 关 键 词： | 环氧树脂 化学镀镍 制备工艺 结合力 |
Electroless Nickel Plating on the Surface of Epoxy Resin and Evaluation of Plating Adhesion |
| |
| JIN Peng,DONG Shi-yun,ZHANG Xiao-dong,WANG Xiao-he.Electroless Nickel Plating on the Surface of Epoxy Resin and Evaluation of Plating Adhesion[J].China Surface Engineering,2011,24(3):69-73. |
| |
| Authors: | JIN Peng DONG Shi-yun ZHANG Xiao-dong WANG Xiao-he |
| |
| Affiliation: | JIN Peng,DONG Shi-yun,ZHANG Xiao-dong,WANG Xiao-he(Science and Technology on Remanufacturing Laboratory,Academy of Armored Forces Engineering,Beijing 100072) |
| |
| Abstract: | Nickel coating was covered on the surface of epoxy resin by electroless plating process.Surface and section morphologies of the coatings were observed.Effects of the solution temperature on morphologies,deposition rate and adhesion were studied.The influence of the solution pH value on quality of the coatings and deposition rate was investigated and the adhesion of the nickel coatings was evaluated.The results showed that the deposition rate increased with rise of the solution temperature.The optimum proces... |
| |
| Keywords: | epoxy resin electroless nickel plating processing parameters adhesion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《中国表面工程》浏览原始摘要信息 |
|
点击此处可从《中国表面工程》下载全文 |
|
