| 支撑板弯曲模的结构设计改进 |
| |
| 引用本文： | 钟江静,周梦荣,宗越,梁士红.支撑板弯曲模的结构设计改进[J].锻压技术,2011,36(3):109-112. |
| |
| 作者姓名： | 钟江静 周梦荣 宗越 梁士红 |
| |
| 作者单位： | 苏州工业职业技术学院机电工程系;苏州胜利精密制造科技股份有限公司; |
| |
| 摘 要： | 根据支撑板的技术要求,对支撑板进行了工艺分析,介绍了支撑板弯曲模具的主要工作原理,然后针对支撑板弯曲模在弯曲时易出现的弯曲回弹、弯裂等质量问题,研究了解决办法,确定了改进措施;特别分析了弯曲高度较小的厚板料在弯曲时因受凸模的挤压力作用,会在工件表面产生压痕的问题,从而阐述了所采取的工艺方法;针对性地描述了如何对模具的弯...
|
| 关 键 词： | 弯曲模 弯曲凸模 弯曲凹模 弯曲回弹 |
Structure design improvement of support board's bending die |
| |
| ZHONG Jiang-jing,ZHOU Meng-rong,ZONG Yue,LIANG Shi-hong.Structure design improvement of support board's bending die[J].Forging & Stamping Technology,2011,36(3):109-112. |
| |
| Authors: | ZHONG Jiang-jing ZHOU Meng-rong ZONG Yue LIANG Shi-hong |
| |
| Affiliation: | ZHONG Jiang-jing1,ZHOU Meng-rong2,ZONG Yue2,LIANG Shi-hong1(1.Mechanical &Electrical Engineering Department,Suzhou Institute of Industrial Technology,Suzhou 215104,China,2.Suzhou Victory Precision Manufacture Co.,Ltd.,Suzhou 215000,China) |
| |
| Abstract: | According to the support board's technical requirements,the process of the support board was analyzed,and the work principle of its bending die was introduced.Then in view of the support board's quality problems of resilience and breaks during bending,ways of solving the problems were researched and the improving measures were selected.Specially,the question was analyzed that the surface of the workpiece had scratches for the bending punch would extrude the plate when the smaller bending height of the thick... |
| |
| Keywords: | bending die bending punch bending female die bending resilience |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
