| 桨叶轴的有限元分析 |
| |
| 引用本文： | 路原睿.桨叶轴的有限元分析[J].化工机械,2009,36(3):252-255. |
| |
| 作者姓名： | 路原睿 |
| |
| 作者单位： | 天华化工机械及自动化研究设计院 |
| |
| 摘 要： | 利用参数化建模，针对桨叶干燥机的桨叶轴分别受到压力载荷、重力载荷、扭矩载荷的作用建立有限元模型，分别对以上载荷作用下轴身结构尺寸不断改变情况所受应力进行研究，提出了在各载荷作用下，轴身结构改变对应力值的影响规律。
|
| 关 键 词： | 桨叶干燥机 桨叶轴 有限元 结构分析 |
Finite Element Analysis of Propeller Shafts |
| |
| LU Yuanrui.Finite Element Analysis of Propeller Shafts[J].Chemical Engineering & Machinery,2009,36(3):252-255. |
| |
| Authors: | LU Yuanrui |
| |
| Affiliation: | LU Yuanrui ( Tianhua Institute of Chemical Machinery and Automation, Lanzhou, 730060, Gansu, China ) |
| |
| Abstract: | A finite element model was founded because the propeller shafts of propeller dryers were subjected to pressure load,weight load,and torque load respectively,the stresses mentioned above borne by the propeller shafts were respectively studied under the condition of constant changes of the structure sizes of the propeller shafts,the influence law of the structure change of the propeller shafts on the stress value was proposed under the action of various loads. |
| |
| Keywords: | Propeller Dryer Propeller Shaft Finite Element Structure Analysis |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
