Alloy optimisation of bainitic steel for large plastic mould |
| |
Authors: | Z. Zhang X.-C. Wu N. Li Y.-A. Min |
| |
Affiliation: | School of Materials Science and Engineering, Shanghai University, Shanghai 200072, China |
| |
Abstract: | Based on the phase transformation theories, especially the T0 concept of bainite transformation, alloy optimisation of bainitic steel with carbides has been carried out aiming at the produce of plastic mould with large cross-section. The effect of manganese and silicon on proeutectoid ferrite and bainite transformation is explored by dilatometric analysis, XRD and different microscopy techniques. The results show that after the alloy optimisation, the transformation of proeutectoid ferrite is suppressed and when the cooling rate is lower than 0·1°C?s??1, the new lower bainite transformation appears by decreasing carbon capacity of austenite and promoting carbide precipitation. Industrial production proves that the optimised alloy SDP1 can meet the demand for the plastic mould with the thickness of 1050?mm. |
| |
Keywords: | Mould steel Alloy design Bainite Retained austenite Proeutectoid ferrite |
|
|