| 四辊平整机轧制过程多体接触耦合变形有限元模拟 |
| |
| 引用本文： | 李学通,杜凤山,孙静娜,吴志贺. 四辊平整机轧制过程多体接触耦合变形有限元模拟[J]. 材料科学与工艺, 2009, 0(6): 789-792 |
| |
| 作者姓名： | 李学通 杜凤山 孙静娜 吴志贺 |
| |
| 作者单位： | 燕山大学机械工程学院; |
| |
| 基金项目： | 国家自然科学基金资助项目(50534020); 河北省自然科学基金资助项目(E2008000809); 博士基金(B175) |
| |
| 摘 要： | 为了提高四辊平整机的板型控制精度,采用非线性大变形弹塑性有限元法,考虑辊系弹性变形和轧件弹塑性变形的耦合关系,建立辊系与带钢多体接触的平整过程三维分析模型.利用该模型对不同轧制工艺条件进行的模拟计算,得到了平整小压下量时的接触压扁及应力状态分布规律和工艺参数对辊系弯曲变形及辊缝形状分布的影响规律.所建模型和分析结果可用于现场轧制过程离线分析和指导在线模型的设定.
|
| 关 键 词： | 平整机 有限元 多体接触 辊系变形 弯辊力 |
FEM simulation on coupled deformation in multiple-body contact on rolling process of 4-roll skin miller |
| |
| LI Xue-tong,DU Feng-shan,SUN Jing-na,WU Zhi-he. FEM simulation on coupled deformation in multiple-body contact on rolling process of 4-roll skin miller[J]. Materials Science and Technology, 2009, 0(6): 789-792 |
| |
| Authors: | LI Xue-tong DU Feng-shan SUN Jing-na WU Zhi-he |
| |
| Affiliation: | LI Xue-tong,DU Feng-shan,SUN Jing-na,WU Zhi-he(College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China) |
| |
| Abstract: | In order to improve the control accuracy of strip profile in four-roll skin miller,a multi-body contact 3-D skinning model was established using nonlinear elastic-plastic finite element method,with consideration of coupling relationship between elastic deformation of rolls and elastic-plastic deformation of workpiece. Based on the model different rolling processes were simulated. The distributions of contact flattening and stress state in deformation region were obtained in skinning with small draught,and t... |
| |
| Keywords: | skin miller FEM multi-body contact roll deformation bend-roll force |
| 本文献已被 CNKI 等数据库收录！ |
|
