| 开关磁阻电机启动过程分析 |
| |
| 引用本文： | 石磊,王勉华.开关磁阻电机启动过程分析[J].电气传动,2010,40(2). |
| |
| 作者姓名： | 石磊 王勉华 |
| |
| 作者单位： | 西安科技大学,电气与控制学院,陕西,西安,710054 |
| |
| 基金项目： | 陕西省教育厅专项科研计划项目(09JK586) |
| |
| 摘 要： | 如何解决开关磁阻电机的启动问题以及启动后的衔接问题是研究开关磁阻电机控制的重要组成部分。分析了开关磁阻电机启动过程中出现的问题及其解决方案。启动实验采用两相启动方式,并利用仿真软件Matlab对开关磁阻电机的启动进行了仿真,分析了启动电流、转矩、转速、磁链,角位置等参数,得到了较好的仿真实验波形。证实了SRM启动阶段稳定可靠,运行良好。
|
| 关 键 词： | 开关磁阻电机 位置传感器 转子位置检测 启动 |
Analysis on Starting Process of SRM |
| |
| SHI Lei,WANG Mian-hua.Analysis on Starting Process of SRM[J].Electric Drive,2010,40(2). |
| |
| Authors: | SHI Lei WANG Mian-hua |
| |
| Affiliation: | Institute of Electrical and Control;Xi'an University of Science and Technology;Xi'an 710054;Shaanxi;China |
| |
| Abstract: | How to resolve the problem of the starting process of switched reluctance motor,as well as the problem of the link-up after starting process is an important part of the research of the contol in switched reluctance motor.The problem of the starting process of switched reluctance motor was analyzed,and a proposal to solve the problem was put forward.Using two phase start-up method to experiment,and simulate the start-up process of SRM by matlab,analyzed the starting current,torque,speed and other parameters,... |
| |
| Keywords: | switched reluctance motor position sensor rotor position detection starting |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
