| 铝合金板剪力墙抗震性能研究 |
| |
| 引用本文： | 张青云,郝际平,白睿,崔阳阳,黄育琪. 铝合金板剪力墙抗震性能研究[J]. 钢结构, 2013, 0(9): 12-17 |
| |
| 作者姓名： | 张青云 郝际平 白睿 崔阳阳 黄育琪 |
| |
| 作者单位： | 西安建筑科技大学,西安710055 |
| |
| 基金项目： | 国家自然科学基金项目（51178381）; 住房和城乡建设部研究开发项目（2012-k2-17）; 陕西省“13115”科技创新工程重大科技专项项目（2009ZDKG-66） |
| |
| 摘 要： | 传统钢板剪力墙的周边框架和内嵌板均采用普通钢材。随着耗能抗震理念的发展,将内嵌板中的普通钢板替换成低屈服点的铝合金板,组成铝合金板剪力墙。采用数值方法研究铝合金板剪力墙在单调荷载作用下的抗剪性能和在低周反复荷载作用下的滞回性能。研究显示:与普通钢板相比,铝合金板更易发生剪切屈曲不先于剪切屈服,对周边框架的要求更低且耗能性能更好。
|
| 关 键 词： | 铝合金板剪力墙 高厚比 柱刚度 耗能性能 |
SEISMIC PERFORMANCE OF ALUMINIUM ALLOY PLATE SHEAR WALL |
| |
| ZhangQingyun Hao Jiping Bai Rui CuiYangyang HuangYuqi. SEISMIC PERFORMANCE OF ALUMINIUM ALLOY PLATE SHEAR WALL[J]. Steel Construction, 2013, 0(9): 12-17 |
| |
| Authors: | ZhangQingyun Hao Jiping Bai Rui CuiYangyang HuangYuqi |
| |
| Affiliation: | ZhangQingyun Hao Jiping Bai Rui CuiYangyang HuangYuqi (Xi＇an University of Architecture and Technology, Xi＇an 710055, China) |
| |
| Abstract: | In the traditional steel plate shear wall system,the conventional structural steel is selected for the boundary frame and the infill panel.Along with the development of the seismic energy dissipation concept, aluminium alloy plate shear wall is put forward,whose infill panels are replaced by aluminum alloy,with a low yield point and good ductility performance.The shear strength under monotonic loading effect and the hysteretic behavior under low cyclic loads were analysed by numerical methods for aluminum alloy plate shear wall.Studies showed that,aluminium alloy plates are more likely to happen shear buckling not prior to shear yield compared with ordinary steel plate and they have lower requirements on surrounding framework and better energy performance. |
| |
| Keywords: | aluminium alloy plate shear wall height-to-thickness ratio column stiffness dissipation capacity |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
