| 水基胶覆膜机覆膜系统试验与分析 |
| |
| 引用本文： | 沈嵘枫,曾任仁,陈金山,吕义勇,SHEN Rong-feng,ZENG Ren-ren,CHEN Jin-shan,Lǖ Yi-yong.水基胶覆膜机覆膜系统试验与分析[J].淮海工学院学报,2006,15(1):11-13,24. |
| |
| 作者姓名： | 沈嵘枫 曾任仁 陈金山 吕义勇 SHEN Rong-feng ZENG Ren-ren CHEN Jin-shan Lǖ Yi-yong |
| |
| 作者单位： | 福建农林大学交通学院 福建福州350002 |
| |
| 基金项目： | 福建省教育厅科研项目
,
福建省科技厅科研项目 |
| |
| 摘 要： | 覆膜系统设计是设计环保节能型覆膜机的技术关键。通过对典型的3种涂布方式比选,并进行正交实验,测定其胶层厚度变动系数CD,得出涂布方式对厚度变动系数的影响;复膜压合质量实验方法采用正交分级实验方法,得出复合压力及涂布量对疵斑点率的影响。最终确立覆膜系统主要参数以及系统方案。
|
| 关 键 词： | 覆膜 压合 涂布 上胶 |
| 文章编号： | 1672-6685（2006）01-0011-03 |
| 收稿时间： | 2005-07-07 |
| 修稿时间： | 2006-01-10 |
Experiment and Analysis of Laminator Laminating System |
| |
| SHEN Rong-feng,ZENG Ren-ren,CHEN Jin-shan.Experiment and Analysis of Laminator Laminating System[J].Journal of Huaihai Institute of Technology:Natural Sciences Edition,2006,15(1):11-13,24. |
| |
| Authors: | SHEN Rong-feng ZENG Ren-ren CHEN Jin-shan |
| |
| Abstract: | The designing of laminating system is one of the key techniques in the designing of energy-saving and environment-protecting laminators.We conducted orthogonal experiments on three modes of application,determining the glue-line coefficient of thickness variation and the influence of application modes upon the coefficient of thickness variation.Besides,we adopted the quadrature classification experimental technique for laminating pressing quality experiment and obtained the influence of laminating pressing and application quantity upon the scab-point rate variation.We have succeeded in obtaining all the main system parameters and the system project. |
| |
| Keywords: | laminating press application sizing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
