| 超高速磨削极限加工效率模型的理论研究 |
| |
| 引用本文： | 宋贵亮 蔡光起. 超高速磨削极限加工效率模型的理论研究[J]. 山东轻工业学院学报, 2000, 14(3): 1-4 |
| |
| 作者姓名： | 宋贵亮 蔡光起 |
| |
| 作者单位： | [1]山东轻工业学院机电工程系,山东济南 [2]东北大学机械学院,辽宁沈阳 |
| |
| 基金项目： | 山东省优秀中青年科学家资助项目!(980 9)，济南市科技明星计划资助!项目 (9810 7) |
| |
| 摘 要： | 超高速磨削系统的机械容量与能力是限制磨削效率的最主要约束条件。本文研究了超高速磨削系统的可行性约束条件，通过理论分析得到了多条件约束下的高效深磨极限效率模型，试验结果和理论值较好地吻合。
|
| 关 键 词： | 金属加工 磨削 超高速磨削 极限加工效率模型 |
Theoretical researches on maximun machining efficiency model in ultra-high speed grinding |
| |
| SONG Gui-liang ,LIU Xing-guo ,ZHANG Wei ,WEI Gao-feng ,CAI Guang-qi. Theoretical researches on maximun machining efficiency model in ultra-high speed grinding[J]. Journal of Shandong Institute of Light Industry(Natural Science Edition), 2000, 14(3): 1-4 |
| |
| Authors: | SONG Gui-liang LIU Xing-guo ZHANG Wei WEI Gao-feng CAI Guang-qi |
| |
| Affiliation: | SONG Gui-liang 1,LIU Xing-guo 1,ZHANG Wei 1,WEI Gao-feng 1,CAI Guang-qi 2 |
| |
| Abstract: | The mechanical capacity and ability are the most important constraints restricting grinding efficiency.A feasibility study on the constraints in the ultra-high speed grinding system in carried out by the authors of this paper.A maximum efficiency model of multi-constraints in high efficiency deep grinding is presented based on the theoretical analysis.The experimental result coincides well with the theoretical value. |
| |
| Keywords: | efficiency constraints model |
| 本文献已被 CNKI 维普 等数据库收录！ |
