| 激光重熔对电冶钢结硬质合金表面显微组织的影响 |
| |
| 引用本文： | 张成军,尤显卿,宋雪峰,黄曼平,马建国. 激光重熔对电冶钢结硬质合金表面显微组织的影响[J]. 硬质合金, 2006, 23(4): 198-202 |
| |
| 作者姓名： | 张成军 尤显卿 宋雪峰 黄曼平 马建国 |
| |
| 作者单位： | 1. 合肥工业大学材料科学与工程学院,安徽合肥,230009
2. 安徽建筑工业学院机械与电气工程系,安徽合肥,230022 |
| |
| 摘 要： | 采用5.0kW横流CO2激光器对电冶钢结硬质合金DJW40表面进行重熔处理。对重熔区显微组织进行了研究,研究表明:激光重熔区分为熔凝区、过渡区及热影响区;熔凝区组织细小且致密,由粘结相和碳化物构成;大颗粒碳化钨部分溶解,小颗粒碳化物完全溶解;相比于基体,过渡区碳化物数量增多,过渡区的厚度与激光扫描速度成相反的变化;热影响区为相变硬化区,小颗粒碳化物有所增多。激光重熔可以大大改善电冶钢结硬质合金表面的组织结构。
|
| 关 键 词： | 激光重熔 DJW40 显微组织 WC |
| 收稿时间： | 2006-05-03 |
| 修稿时间： | 2006-05-03 |
Influence of Laser Surface Re-melting to Surface Microstructure of Steel-bonded Cemented Carbide |
| |
| Zhang Chengjun,You Xianqing,Song Xueping,Huang Manping,Ma Jianguo. Influence of Laser Surface Re-melting to Surface Microstructure of Steel-bonded Cemented Carbide[J]. Cemented Carbide, 2006, 23(4): 198-202 |
| |
| Authors: | Zhang Chengjun You Xianqing Song Xueping Huang Manping Ma Jianguo |
| |
| Affiliation: | 1.Institute of Material Science and Engineering, Hefei University of technology ,Hefei 230009, China; 2. Department of Mechanical and Electrical Engineering, Anhui Architectural Engineering College, Hefei 230022, China |
| |
| Abstract: | DJW40 samples by means of electro-slag and casting were melted by transverse flow CO2 laser with the maximum power of 5.0kW. The result of microstructures analysis show: there are melted zone , transient zone and heat affected zone in the laser melted layer. In the melted zone ,the microstructures are refined, which consist of carbides and bond phases. Big WC particulates dissolved partially ,while fine carbides dissolved completely .The numbers of Carbide become more in transient zone than the substrate ,and so are in the heat affected zone. The depth of transient zone is in reverse to the laser scan velocity. Solid phase transformation happened in the heat affected zone. In a word, surface micro- -structure of DJW40 can be improved by laser surface melting. |
| |
| Keywords: | DJW40 WC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
