| 基于正交试验法的注塑件工艺参数多目标优化 |
| |
| 引用本文： | 林权.基于正交试验法的注塑件工艺参数多目标优化[J].现代塑料加工应用,2011,23(4):41-44. |
| |
| 作者姓名： | 林权 |
| |
| 作者单位： | 武夷学院,福建武夷山,354300 |
| |
| 摘 要： | 从生产实际出发,基于正交试验法和采用Moldflow软件,对不同工艺条件下的塑件成型过程进行模拟分析,最后运用多目标综合平衡法,对塑件成型后的顶出体积收缩率、翘曲变形量和浇口注射压力进行综合评判,确定最优的注射工艺参数组合方案。在此基础上改进模具设计,并对该工艺方案进行生产验证,实际证明与工艺优化前对比效果明显。
|
| 关 键 词： | 正交试验法 注塑工艺 多目标优化 成型 模拟 |
Multi-Objective Optimization of Injection Molding Process Based on Orthogonal Experimental Method |
| |
| Lin Quan.Multi-Objective Optimization of Injection Molding Process Based on Orthogonal Experimental Method[J].Modern Plastics Processing and Applications,2011,23(4):41-44. |
| |
| Authors: | Lin Quan |
| |
| Affiliation: | Lin Quan(Wuyi University,Wuyishan,Fujian,354300) |
| |
| Abstract: | Based on the actual production,orthogonal experimental method and Moldflow software,the simulation of the molding process under different process conditions was analysed,and then a comprehensive judgment on the volume shrinkage ratio,warpage value and injection pressure was made by way of the multi-objective balancing method,and the optimal injection process parameters were determined finally.Then the mold design was improved,and technics project was tested by production.The test result proves that the new ... |
| |
| Keywords: | orthogonal experiment method injection molding process multi-objective optimization mould simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
