| 不同热压方法对无胶烟秆碎料板力学性能的影响 |
| |
| 引用本文： | 郑 霞,徐剑莹. 不同热压方法对无胶烟秆碎料板力学性能的影响[J]. 包装工程, 2011, 32(17): 41-43,59 |
| |
| 作者姓名： | 郑 霞 徐剑莹 |
| |
| 作者单位： | 中南林业科技大学,长沙,410004;中南林业科技大学,长沙,410004 |
| |
| 基金项目： | 国家林业局948项目(2011-4-22); 国家自然科学基金项目(30771681) |
| |
| 摘 要： | 分别采用普通热压和喷蒸热压2种热压方法制备了无胶烟秆碎料板,对它们的物理力学性能进行了对比研究与分析。结果发现,与普通热压法相比,喷蒸热压法制备的无胶烟秆碎料板的静曲强度、弹性模量与内结合强度明显提高,吸水厚度膨胀率显著减小,其原因可能是不同热压过程中烟秆碎料发生了化学变化。
|
| 关 键 词： | 烟秆 无胶碎料板 普通热压 喷蒸热压 力学性能 |
| 收稿时间： | 2011-06-08 |
| 修稿时间： | 2011-09-10 |
Effect of Hot-pressing Method on Mechanical Properties of Tobacco Stem Binderless Particleboard |
| |
| ZHENG Xia and XU Jian-ying. Effect of Hot-pressing Method on Mechanical Properties of Tobacco Stem Binderless Particleboard[J]. Packaging Engineering, 2011, 32(17): 41-43,59 |
| |
| Authors: | ZHENG Xia and XU Jian-ying |
| |
| Affiliation: | ZHENG Xia,XU Jian-ying(Central South University of Forestry & Technology,Changsha 410004,China) |
| |
| Abstract: | Tobacco stem binderless particleboard was prepared by ordinary hot-pressing and steam injection hot-pressing respectively,and mechanical properties of particleboard with different hot-pressing method was studied and analyzed.The results showed that,compared with ordinary hot-pressing,MOR,MOE and IB of the tobacco stem binderless particleboard with steam injection hot-pressing increased significantly;TS decreased significantly.The possible reason was that chemical changes of tobacco stem particles with diffe... |
| |
| Keywords: | tobacco stem binderless particleboard ordinary hot-pressing steam injection hot-pressing mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《包装工程》浏览原始摘要信息 |
|
点击此处可从《包装工程》下载全文 |
|
