| DD6单晶高温合金导向叶片定向凝固过程数值模拟 |
| |
| 引用本文： | 谢洪吉,李嘉荣,金海鹏,刘世忠,熊继春.DD6单晶高温合金导向叶片定向凝固过程数值模拟[J].材料工程,2011(11):58-61,67. |
| |
| 作者姓名： | 谢洪吉 李嘉荣 金海鹏 刘世忠 熊继春 |
| |
| 作者单位： | 北京航空材料研究院先进高温结构材料国防科技重点实验室,北京,100095 |
| |
| 摘 要： | 建立涡轮导向叶片三维实体模型,采用有限元软件ProCAST对DD6单晶高温合金导向叶片凝固过程温度场进行数值模拟；测试DD6单晶高温合金导向叶片不同位置凝固过程的温度变化.结果表明:数值模拟结果与实测结果偏差小于5％,吻合良好;导向叶片叶身的温度梯度大部分保持在25～45℃/cm范围内,缘板处温度梯度约为35℃/cm,...
|
| 关 键 词： | DD6 导向叶片 数值模拟 温度场 |
Numerical Simulation of Directional Solidification Process on the Vane of Single Crystal Superalloy DD6 |
| |
| XIE Hong-ji,LI Jia-rong,JIN Hai-peng,LIU Shi-zhong,XIONG Ji-chun.Numerical Simulation of Directional Solidification Process on the Vane of Single Crystal Superalloy DD6[J].Journal of Materials Engineering,2011(11):58-61,67. |
| |
| Authors: | XIE Hong-ji LI Jia-rong JIN Hai-peng LIU Shi-zhong XIONG Ji-chun |
| |
| Affiliation: | XIE Hong-ji,LI Jia-rong,JIN Hai-peng,LIU Shi-zhong,XIONG Ji-chun(National Key Laboratory of Advanced High Temperature Structural Materials,Beijing Institute of Aeronautical Materials,Beijing 100095,China) |
| |
| Abstract: | The three-dimensional model of the vane was built,temperature fields of DD6 single crystal vane was calculated with finite element software ProCAST.The temperature values of vane were indicated from the measurement during directional solidification.The simulated results were compared to the measured results,and the results showed that good consistency was observed and the deviation of temperatures was less than 5%.The temperature gradient of airfoil was between 25℃/cm and 45℃/cm,and the temperature gradient of platform was about 35℃/cm,and the isotherm of vane was tilted. |
| |
| Keywords: | DD6 vane numerical simulation temperature field |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
