| B对碳弧焊Fe-Cr-C系耐磨合金的组织和耐磨性影响 |
| |
| 引用本文： | 杨绍斌,董伟,李婷,王洪才.B对碳弧焊Fe-Cr-C系耐磨合金的组织和耐磨性影响[J].兵器材料科学与工程,2011,34(6):33-35. |
| |
| 作者姓名： | 杨绍斌 董伟 李婷 王洪才 |
| |
| 作者单位： | 辽宁工程技术大学材料科学与工程学院,辽宁阜新,123000;辽宁工程技术大学材料科学与工程学院,辽宁阜新,123000;辽宁工程技术大学材料科学与工程学院,辽宁阜新,123000;辽宁工程技术大学材料科学与工程学院,辽宁阜新,123000 |
| |
| 摘 要： | 采用碳弧焊的方法,通过在较高范围内(0.4%~2.5%)调节Fe-Cr-C系耐磨堆焊合金粉块中B的含量,探讨B对组织和耐磨性能的影响。结果表明,添加B使得初生碳化物明显细化,数量明显增多,分布也趋于均匀,细小的共晶碳化物增多,并产生硬质相B4C。实验中4种合金粉块均与基体(Q235)有良好的冶金结合。B的质量分数在0.4%~2.5%范围内随着含量的升高,堆焊层的硬度和耐磨性呈上升趋势。当B的质量分数为2.5%时,其硬度达到64.7HRC,磨损质量损失仅为1.1 mg。
|
| 关 键 词： | Fe-Cr-C系耐磨合金 B元素 碳弧焊 耐磨性 |
Effect of boron on microstructure and wear resistance of carbon arc hardfacing layer with Fe-Cr-C alloy system |
| |
| YANG Shaobin,DONG Wei,LI Ting,WANG Hongcai.Effect of boron on microstructure and wear resistance of carbon arc hardfacing layer with Fe-Cr-C alloy system[J].Ordnance Material Science and Engineering,2011,34(6):33-35. |
| |
| Authors: | YANG Shaobin DONG Wei LI Ting WANG Hongcai |
| |
| Affiliation: | YANG Shaobin,DONG Wei,LI Ting,WANG Hongcai (College of Material Science and Engineering,Liaoning Technical University,Fuxin 123000,China) |
| |
| Abstract: | Using carbon arc welding method,through adjusting boron content of Fe-Cr-C hardfacing alloy system powder block in the high range(0.4%-2.5%),the effect of B on microstructure and wear resistance properties was studied.The results show that the addition of boron can refine primary carbide obviously,increase its number,and the distribution of which tends to be uniform.Fine eutectic carbide also increases,and a kind of hard phase B4C is generated.In the Experiment,four kinds of alloy powder blocks and matrix(Q... |
| |
| Keywords: | Fe-Cr-C hardfacing alloy B element carbon arc welding wear resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
