首页 | 本学科首页   官方微博 | 高级检索  
     

SF_6混合气体灭弧介质的选择
引用本文:刘亚芳,王其平.SF_6混合气体灭弧介质的选择[J].高压电器,1993,29(2):12-16.
作者姓名:刘亚芳  王其平
作者单位:西安交通大学 710049 (刘亚芳),西安交通大学 710049(王其平)
摘    要:首先考察了16种常用气体构成的SF_6混合气体。通过分析其液化温度、介电强度、电弧产物的毒性及腐蚀性、热物理性质和传输特性以及价格成本,认为SF_6/N_2混合气体可以代替纯SF_6做为GCB(气体断路器)在低温环境下的灭弧介质。之后,研究了SF_6/N_2的开断特性。研究结果证明,SF_6/N_2混合气体具有较好的开断特性。

关 键 词:六氟化硫    混合气体  灭弧  开断特性

Selection of SF_6 Gas Mixture as Arc-quenching Medium
Liu Yafang,Wang Qiping.Selection of SF_6 Gas Mixture as Arc-quenching Medium[J].High Voltage Apparatus,1993,29(2):12-16.
Authors:Liu Yafang  Wang Qiping
Abstract:With considerations on me liquitied point,dietectric strengin,toxicity and corrosiveness of the arc Products,thernlophysical properties and transmission properties as well as the cost,the gas mixture of SF6/N2 was chosen to be the arc-quenching medium of GCB (Gas Circuit Breaker).By means of numerical analysis and experiment,it shows that SF6/N2,instead of SF6,is a good choice in low temperature circumstances.
Keywords:SF6  N2  gas mixture  arc quenching  interruption property  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号