| CIMS环境下的CAPP集成技术研究 |
| |
| 引用本文： | 江征风,杨红兵,丁毓峰. CIMS环境下的CAPP集成技术研究[J]. 机械工程师, 2006, 0(5): 88-90 |
| |
| 作者姓名： | 江征风 杨红兵 丁毓峰 |
| |
| 作者单位： | 武汉理工大学,机电工程学院,湖北,武汉,430070 |
| |
| 摘 要： | 当前CAD/CAPP/CAM集成是CIMS的难点和关键。文中简要概述了计算机辅助工艺设计(CAPP)的研究现状及趋势,同时提出了简单的解决这些问题的方法。重点论述了CIMS环境下CAPP集成技术的研究。
|
| 关 键 词： | 计算机集成制造系统(CIMS) 集成技术 |
| 文章编号： | 1002-2333(2006)05-0088-03 |
| 收稿时间： | 2005-12-09 |
| 修稿时间： | 2005-12-09 |
The Research on Integrated Technology of CAPP in CIMS |
| |
| JIANG Zheng-feng,YANG Hong-bing,DING Yu-feng. The Research on Integrated Technology of CAPP in CIMS[J]. Mechanical Engineer, 2006, 0(5): 88-90 |
| |
| Authors: | JIANG Zheng-feng YANG Hong-bing DING Yu-feng |
| |
| Affiliation: | 1.School of Mechantronic Engineering ,Wuhan University of Technology ,Wuhan 430070,China |
| |
| Abstract: | The integrated of CAD/CAPP/CAM are the key issues currently. In this paper I summarized the status and direction of CAPP. At the same time, put forward several simple methods to solve these problems. Emphasis on the research on integrated technology of CAPP in CIMS. |
| |
| Keywords: | CAPP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
