| 连接板级进模设计 |
| |
| 引用本文： | 金龙建. 连接板级进模设计[J]. 模具工业, 2011, 37(6): 17-20 |
| |
| 作者姓名： | 金龙建 |
| |
| 作者单位： | 上海普极电子有限公司,上海,201323 |
| |
| 摘 要： | 分析了连接板级进模的冲压工艺,进行了零件预冲孔计算,介绍了零件排样、模具结构及模具关键零部件设计。实践证明,模具结构可靠,生产效率高,对板类零件的级进模设计有一定参考价值。
|
| 关 键 词： | 级进模 连接板 冲压工艺 排样 预冲孔 |
Design of progressive die for link plate |
| |
| JIN Long-jian. Design of progressive die for link plate[J]. Die & Mould Industry, 2011, 37(6): 17-20 |
| |
| Authors: | JIN Long-jian |
| |
| Affiliation: | JIN Long-jian(Shanghai Puji Electronics Co.,Ltd,Shanghai 201323,China) |
| |
| Abstract: | The stamping process with a progressive die for a link plate was presented which includes the calculation of pre-punched holes,the layout design,and the development of die structure and key parts. |
| |
| Keywords: | progressive die link plate stamping technology layout design pre-punching |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
