| 多弧离子镀多元多层膜在电池外壳成形凸模中的应用 |
| |
| 引用本文： | 舒畅,谢光荣. 多弧离子镀多元多层膜在电池外壳成形凸模中的应用[J]. 模具工业, 2011, 37(6): 67-70 |
| |
| 作者姓名： | 舒畅 谢光荣 |
| |
| 作者单位： | 广东工业大学材料与能源学院,广东广州,510006 |
| |
| 摘 要： | 采用多弧离子镀膜法在不锈钢电池外壳成形凸模上沉积Ti/TiN/(Ti-Zr)N/ZrN多元多层膜,并对成形凸模的失效形式、镀层组织形貌、组织结构、显微硬度、耐磨性能等进行了分析和讨论。试验结果表明,已镀凸模的使用寿命比未镀凸模提高6倍以上,能取得良好的经济效益,大幅提高电池外壳质量。
|
| 关 键 词： | 电池外壳 成形凸模 多弧离子镀 多元多层膜 |
Application of multi-component and multi-layer film by multi-arc ion plating on the forming punch for battery shell |
| |
| SHU Chang,XIE Guang-rong. Application of multi-component and multi-layer film by multi-arc ion plating on the forming punch for battery shell[J]. Die & Mould Industry, 2011, 37(6): 67-70 |
| |
| Authors: | SHU Chang XIE Guang-rong |
| |
| Affiliation: | SHU Chang,XIE Guang-rong (Faculty of Materials and Energy,Guangdong University of Technology,Guangzhou,Guangdong 510006,China) |
| |
| Abstract: | Ti/TiN/(Ti-Zr)N/ZrN multi-component and multi-layer film was deposited on the forming punch for stainless battery shell through multi-arc ion plating.The failure mode of the forming punch,the morphology,microstructure,microhardness and wear resistance of the coating were analyzed and discussed.The experimental results show that the service life of forming punch with film is more than six times longer than that without film. |
| |
| Keywords: | battery shell forming punch multi-arc ion plating multi-component and multi-layer film |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
