| 基于知识的钣金冲模凸模与凹模快速设计研究与开发 |
| |
| 引用本文： | 杨艳洲,李泷杲,黄翔,朱明华,徐应强.基于知识的钣金冲模凸模与凹模快速设计研究与开发[J].模具工业,2011,37(7):6-9. |
| |
| 作者姓名： | 杨艳洲 李泷杲 黄翔 朱明华 徐应强 |
| |
| 作者单位： | 1. 南京航空航天大学机电学院,江苏南京,210016
2. 上海飞机制造有限公司,上海,200436 |
| |
| 摘 要： | 传统钣金冲模的凸、凹模设计以几何形状作为操作对象,效率低且很少融入模具设计知识和设计经验,限制了模具的快速设计,为此提出了钣金冲模的凸、凹模快速设计方法,该方法以模具设计规则为基础,归纳了冲模设计过程中各种典型凸模和凹模设计样式,结合知识工程的基本思想,实现了基于知识的凸、凹模设计,并具有凸、凹模的快速互换功能,并可对凸模自动进行强度和刚度校核。
|
| 关 键 词： | 钣金 冲模 凸、凹模 知识 快速设计 |
Knowledge-based rapid design of punch and die of sheet metal stamping die |
| |
| YANG Yan-zhou,LI Shuang-gao,HUANG Xiang,ZHU Ming-hua,XU Ying-qiang.Knowledge-based rapid design of punch and die of sheet metal stamping die[J].Die & Mould Industry,2011,37(7):6-9. |
| |
| Authors: | YANG Yan-zhou LI Shuang-gao HUANG Xiang ZHU Ming-hua XU Ying-qiang |
| |
| Affiliation: | YANG Yan-zhou1,LI Shuang-gao1,HUANG Xiang1,ZHU Ming-hua2,XU Ying-qiang2(1.College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,Jiangsu 210016,China,2.Shanghai,Aircraft Manufacturing Co.,Ltd,Shanghai 200436,China) |
| |
| Abstract: | Traditional design for the punch-die of sheet metal stamping die takes geometry as operation object,it has a low efficiency and is unable to integrate die design knowledge and experience effectively,which limits the rapid design of die.In this study,a rapid design method for the punch-die of sheet metal stamping die was put forwarded based on die design rules.It summarizes various typical stamping die and punch design styles,realizing knowledge-based design,rapid exchange function of punch and die and autom... |
| |
| Keywords: | sheet metal stamping die punch-die knowledge rapid design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
