| 某型航空发动机燃烧室外套超声检测换能器的设计 |
| |
| 引用本文： | 孙金立,肖兴明,杨修德. 某型航空发动机燃烧室外套超声检测换能器的设计[J]. 无损检测, 2004, 26(6): 292-293,296 |
| |
| 作者姓名： | 孙金立 肖兴明 杨修德 |
| |
| 作者单位： | 中国矿业大学,机电与材料工程学院,徐州,221008 |
| |
| 摘 要： | 用超声表面波法检测某型航空发动机燃烧室外套裂纹，需要设计专用换能器。根据外套壁厚和裂纹位置特点，提出了专用超声换能器的设计关键在于工作频率和晶片倾斜角。由理论分析和试验，给出了最佳灵敏度时换能器的工作频率和晶片倾斜角，实际应用效果良好。
|
| 关 键 词： | 超声检验 航空发动机 燃烧室 换能器 设计 |
| 文章编号： | 1000-6656(2004)06-0292-02 |
DESIGN OF ULTRASONIC TESTING TRANSDUCER FOR THE COMBUSTION CHAMBER COAT OF AN AEROENGINE |
| |
| SUN Jin-li,XIAO Xing-ming,YANG Xiu-de. DESIGN OF ULTRASONIC TESTING TRANSDUCER FOR THE COMBUSTION CHAMBER COAT OF AN AEROENGINE[J]. Nondestructive Testing, 2004, 26(6): 292-293,296 |
| |
| Authors: | SUN Jin-li XIAO Xing-ming YANG Xiu-de |
| |
| Abstract: | Transducer was important in ultrasonic testing of the combustion chamber coat of an aeroengine. It was pointed out that the keypoint in designing the special transducer was its working frequency and crystal angle according to the coat thickness and flaw location. The working frequency and crystal angle for optimal sensitivity were obtained by theoretic analysis and experiments. Its practical application was satisfactory. |
| |
| Keywords: | Ultrasonic testing Aeroengine Combustion chamber Transducer Design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
