| 铸造工艺CAD的开发及应用研究 |
| |
| 引用本文： | 沈丙振,金平,王云爱,许庆彦,柳百成,李万鹏,乔劲松.铸造工艺CAD的开发及应用研究[J].铸造技术,2001(4):32-34. |
| |
| 作者姓名： | 沈丙振 金平 王云爱 许庆彦 柳百成 李万鹏 乔劲松 |
| |
| 作者单位： | 1. 清华大学,
2. 沈阳水泵股份有限公司铸钢分厂, |
| |
| 摘 要： | 利用VisualC 6．0和AutoCAD的二次开发工具ObjectARX开发了铸造工艺二维CAD系统，该系统采用AutoCAD菜单开发技术，ARX与MFC联合使用技术、ODBC技术、信息保存与恢复技术，开发了通用铸造工艺参数设计、浇冒口设计和工艺数据库管理等功能模块；并根据工厂实际建立了相应的图库，通过该系统可实现计算机辅助铸造工艺设计，提高设计效率；并结合工厂零件进行了铸造工艺辅助设计。
|
| 关 键 词： | CAD ObjectARX 铸造工艺 |
| 文章编号： | 1000-8365(2001)04-0033-03 |
| 修稿时间： | 2001年1月2日 |
The Development and Application of Casting Process CAD |
| |
| SHEN Bing zhen ,JIN Ping ,WANG Yun ai ,XU Qing yan ,LIU Bai cheng ,LI Wan peng ,QIAO Jin song.The Development and Application of Casting Process CAD[J].Foundry Technology,2001(4):32-34. |
| |
| Authors: | SHEN Bing zhen JIN Ping WANG Yun ai XU Qing yan LIU Bai cheng LI Wan peng QIAO Jin song |
| |
| Affiliation: | SHEN Bing zhen 1,JIN Ping 1,WANG Yun ai 1,XU Qing yan 1,LIU Bai cheng 1,LI Wan peng 2,QIAO Jin song 2 |
| |
| Abstract: | In this article a 2D CAD system for casting design was developed by the virtue of Visual C 6.0 and ObjectARX . The common casting process parameter design module, riser and gating design module, technological database management module in this system have been developed using the techniques of AutoCAD menu development, ARX and MFC combination, ODBC, information saving and resuming and established drawing base accordingly on the base of factory practice. The computer aided casting process design could be realized and the designing effciency could be raised using this system. The developed system has also been used for designing the castings from factories. |
| |
| Keywords: | CAD ObjectARX Casting Process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
