首页 | 本学科首页   官方微博 | 高级检索  
     

电容耦合电阻层析成像传感器结构优化设计研究
引用本文:王保良,张伟波,黄志尧,冀海峰,李海青.电容耦合电阻层析成像传感器结构优化设计研究[J].传感技术学报,2012,25(2):206-211.
作者姓名:王保良  张伟波  黄志尧  冀海峰  李海青
作者单位:浙江大学控制科学与工程学系工业控制技术国家重点实验室
基金项目:国家自然科学基金项目(60972138)
摘    要:针对电容耦合电阻层析成像传感器的优化设计,首先利用有限元仿真软件建立了12电极传感器有限元模型,并分析了后续图像重建所需的传感器灵敏场,之后将该仿真模型与实际传感器相应的测量数据及重建图像进行对比验证,研究表明仿真与实验结果能够较好吻合,为对传感器性能进一步研究提供可靠基础.为了提高系统稳定性及抗干扰能力,以该原始模型...

关 键 词:电阻层析成像  电容耦合  传感器优化设计  非接触  有限元

Optimum Design for Capacitively Coupled Electrical Resistance Tomography Sensor Configuration
WANG Baoliang,ZHANG Weibo,HUANG Zhiyao,JI Haifeng,LI Haiqing.Optimum Design for Capacitively Coupled Electrical Resistance Tomography Sensor Configuration[J].Journal of Transduction Technology,2012,25(2):206-211.
Authors:WANG Baoliang  ZHANG Weibo  HUANG Zhiyao  JI Haifeng  LI Haiqing
Affiliation:(State Key Laboratory of Industrial Control Technology,Department of Control Science and Engineering,Zhejiang University,Hangzhou,310027,China)
Abstract:The optimization for sensor structure of capacitively coupled electrical resistance tomography(CCERT)is presented.The model of the 12-electrode sensor of CCERT has been established by finite element simulation software firstly,and sensitivity field has been calculated for the reconstruction of image.Then the finite element model is verified by comparing the simulation data and reconstructed image with that of experiment respectively.The result shows that the model is reasonable.The effect on the measurement data is studied by simulation for two different models of sensor.Finally,the optimum size of the screen of CCERT sensor is proposed with the minimum influence on the measurements based on the final sensor model discussed previously.The study can provide useful instruction for the design of CCERT sensor.
Keywords:electrical resistance tomography  capacitively coupled  optimum design  contactless  finite element method
本文献已被 CNKI 等数据库收录!
点击此处可从《传感技术学报》浏览原始摘要信息
点击此处可从《传感技术学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号