| ABB智能火焰检测系统应用介绍 |
| |
| 引用本文： | 肖光华,张瑞岩.ABB智能火焰检测系统应用介绍[J].广东电力,2005,18(8):40-42. |
| |
| 作者姓名： | 肖光华 张瑞岩 |
| |
| 作者单位： | 广东国华粤电台山发电有限公司,广东,台山,529228;广东国华粤电台山发电有限公司,广东,台山,529228 |
| |
| 摘 要： | 介绍了ABB智能火焰检测系统在国华粤电台山发电有限公司的应用，该系统在安装、调试阶段运行情况艮好，但是在机组投产后出现火焰检测值偏小、火检信号逐渐减弱等现象。经分析，产生上述问题的主要原因是炉膛燃烧方式与火检探头安装方式不匹配，最后提出了相应的改进措施，以保证机组的安全稳定运行。
|
| 关 键 词： | 检测器 智能单元 火焰检测 |
| 文章编号： | 1007-290X(2005)08-0040-03 |
| 修稿时间： | 2005年6月21日 |
Application of ABB smart flame detection system |
| |
| XIAO Guang-hua,ZHANG Rui-yan.Application of ABB smart flame detection system[J].Guangdong Electric Power,2005,18(8):40-42. |
| |
| Authors: | XIAO Guang-hua ZHANG Rui-yan |
| |
| Abstract: | This paper describes the application of ABB smart flame detection system in Guangdong Guohua Yudean Taishan Power Generation Co., Ltd. The system functioned well during the installation and commissioning periods, but experienced on-the-small-side flame detection values and attenuating flame detection signals after the unit was put into operation. Upon analysis, it is concluded that the problem was mainly caused by the mismatch between the furnace combustion mode and the installation method of the flame probe. Corresponding measures for improvement are presented so as to ensure the operation safety and stability of the unit. |
| |
| Keywords: | detector intelligent unit flame detection |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
