| 一种新型动态称重系统 |
| |
| 引用本文： | 李晓竹,王丽丽.一种新型动态称重系统[J].煤矿机电,2009(1). |
| |
| 作者姓名： | 李晓竹 王丽丽 |
| |
| 作者单位： | 辽宁工程技术大学电气与控制工程学院,辽宁葫芦岛,125105 |
| |
| 摘 要： | 应用动态测量原理对系统进行了分析,设计了基于总线的动态称重系统。硬件设计使用电阻应变片式传感器、∑-△型转换器、单片机、液晶显示器、以及目前应用比较广泛的以总线构建底层生产线网络;软件使用Keil c51语言和汇编语言,在Keilμ Vision2环境下对系统进行编程。设计方案经仿真调试表明,可实现系统的智能化、实时化和网络化。
|
| 关 键 词： | 动态测量 称重 CAN总线 |
Design of New Dynamic Weighing System |
| |
| LI Xiao-zhu,WANG Li-li.Design of New Dynamic Weighing System[J].Colliery Mechanical & Electrical Technology,2009(1). |
| |
| Authors: | LI Xiao-zhu WANG Li-li |
| |
| Affiliation: | Faculty of Electrical and Control Engineering;Liaoning Technical University;Huludao 125105;China |
| |
| Abstract: | The paper introduced dynamic weighting system based on CAN bus.The dynamic measurement principle is applied to carry on the analysis and design the system.In the hardware design,it includes the sensor,A/D converter,single microcomputer,LCD and CAN bus.In the software design,it uses the Keil C51 language and the assembly language,programming under the Keil μ Vision2 environment.By debugging and simulation,it has been verified correctness and effectiveness. |
| |
| Keywords: | dynamic measurement weight up CAN bus |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
