| 钢厂热轧污泥脱水系统的设计与设备选型 |
| |
| 引用本文： | 王晓明,欧阳丽.钢厂热轧污泥脱水系统的设计与设备选型[J].中国给水排水,2007,23(22):57-60. |
| |
| 作者姓名： | 王晓明 欧阳丽 |
| |
| 作者单位： | 1. 美国麦王环保能源集团,麦王环保工程技术有限公司,上海,200135
2. 同济大学环境科学与工程学院,上海,200092 |
| |
| 摘 要： | 介绍了钢厂热轧污泥的组成、特点及热轧污泥处理系统的设计、设备选型及调试运行情况。长期运行实践表明，以全自动悬梁式板框压滤机为主体设备的热轧污泥重力浓缩、加药调理、机械脱水处理工艺系统运行稳定，污泥脱水效果良好，泥饼含固率〉70％且成型较好。
|
| 关 键 词： | 热轧废水 热轧污泥 板框压滤机 污泥脱水系统 |
| 文章编号： | 1000-4602（2007）22-0057-04 |
| 修稿时间： | 2007-07-17 |
Design and Equipment Selection of Hot Rolling Sludge Dewatering System in Steel Plant |
| |
| WANG Xiao-ming,OUYANG Li.Design and Equipment Selection of Hot Rolling Sludge Dewatering System in Steel Plant[J].China Water & Wastewater,2007,23(22):57-60. |
| |
| Authors: | WANG Xiao-ming OUYANG Li |
| |
| Abstract: | The composition and characteristics of the hot rolling sludge in a steel plant as well as the design, equipment selection and debugging of the hot rolling sludge treatment system were introduced. The hot rolling sludge treatment process consists of gravitational thickening, chemical conditioning and mechanical dewatering using an overhead-style automatic plate and frame filter press. The long-term operation results indicate that the process is stable in operation and good in sludge dewatering. The sludge cake forming is good with solid content of greater than 70%. |
| |
| Keywords: | hot rolling wastewater hot rolling sludge plate and frame filter press sludge dewatering system |
| 本文献已被 维普 万方数据 等数据库收录！ |
