| Pro/E Wildfire3.0中标准渐开线斜齿圆柱齿轮参数化设计 |
| |
| 引用本文： | 张海军,张广川,任乃飞.Pro/E Wildfire3.0中标准渐开线斜齿圆柱齿轮参数化设计[J].现代制造工程,2007(4):97-99. |
| |
| 作者姓名： | 张海军 张广川 任乃飞 |
| |
| 作者单位： | 1. 淮安信息职业技术学院,淮安,223003
2. 江苏大学,镇江,212013 |
| |
| 摘 要： | 介绍在Pro/E Wildfire 3.0环境下,实现标准渐开线斜齿圆柱齿轮的参数化设计方法和步骤,从原理出发,利用方程建立渐开线,保证渐开线齿轮齿形的准确性.通过改变相关参数及关系式,能够快速地实现齿轮的参数化造型设计和修改定型,同时也解决了渐开线斜齿圆柱齿轮精确造型的难题.
|
| 关 键 词： | Pro/E 斜齿轮 参数化设计 标准 渐开线 斜齿圆柱齿轮 齿轮参数 化设计 based helical standard design Parametric 造型设计 修改 快速 关系式 相关参数 齿轮齿形 方程建立 利用 原理 设计方法和步骤 |
| 文章编号： | 1671-3133(2007)04-0097-03 |
| 修稿时间： | 2006年11月29 |
Parametric design of standard involute helical gears based on Pro/E Wildfire 3.0 |
| |
| Zhang Hai-jun,Zhang Guang-chuan,Ren Nai-fei.Parametric design of standard involute helical gears based on Pro/E Wildfire 3.0[J].Modern Manufacturing Engineering,2007(4):97-99. |
| |
| Authors: | Zhang Hai-jun Zhang Guang-chuan Ren Nai-fei |
| |
| Abstract: | Discussed the method and steps of the parametric design for standard involute helical gears based on Pro/E Wildfire 3.0 based on the principle,using equation upbuild the involute,can ensure consequently that the total profile of involute gear will be accurate.Only changing relevant parameters and relational expressions,the design of parameter sculpt and modifying the design can be realized fleetly,and the problem of accurate sculpt for involute helical gear was solved. |
| |
| Keywords: | Pro/E Helical gear Parametric design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
