| 影响BOPET薄膜厚度的因素探讨 |
| |
| 引用本文： | 王彩虹.影响BOPET薄膜厚度的因素探讨[J].合成技术及应用,2004,19(2):26-28,34. |
| |
| 作者姓名： | 王彩虹 |
| |
| 作者单位： | 中国石化仪征化纤东丽聚酯薄膜有限公司,江苏,仪征,211900 |
| |
| 摘 要： | 针对影响BOPET薄膜厚度的因素进行了研究。结果表明,不同拉伸比、拉伸温度、铸片条件及APC系统的控制方式对厚度偏差影响较大。通过选择合适的工艺、控制条件可以改善薄膜的厚薄均匀性。
|
| 关 键 词： | 厚度偏差 拉伸比 拉伸温度 铸片 |
| 文章编号： | 1006-334X(2004)02-0026-04 |
Research on BOPET film thickness uniformity |
| |
| WANG Cai-hong.Research on BOPET film thickness uniformity[J].Synthetic Technology and Application,2004,19(2):26-28,34. |
| |
| Authors: | WANG Cai-hong |
| |
| Abstract: | In this paper, the effects on BOPET film thickness are studied. The results show that stretching ratio,stretching temperature,casting conditions and APC system greatly influence the uniformity of film profile. The process is to be optimized for promoting the film thickness uniformity. |
| |
| Keywords: | the deviation of thickness stretching ratio stretching temperature casting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
