Ethanol reforming and partial oxidation with Cu/Nb2O5 catalyst

Ethanol reforming and partial oxidation were studied on Cu/Nb₂O₅ and Ni/Al₂O₃ catalysts. Compared to the Ni/Al₂O₃ catalyst, the Cu/Nb₂O₅ catalyst presents conversion as high as Ni/Al₂O₃ catalyst, however, for the same level of formation of hydrogen it occurs at much lower temperature on the Cu/Nb₂O₅ catalyst, 200 °C lower than for the Ni/Al₂O₃ catalyst, with remarkable little formation of CO, which can be attributed to the strong interaction between copper and niobia. Temperature-programmed desorption (TPD-ethanol) and surface reactions (TPSR) of partial oxidation of ethanol showed formation of ethylene, acetaldehyde, ethane and mainly H₂ and CO₂ besides little methane. DRIFTS results are in accordance with TPD analysis and the formation of acetate species at room temperature suggests reactivity of the surface and its oxidative dehydrogenation capacity. The adsorption of ethanol gives rise to ethoxide species, which form acetate and acetaldehyde that can be oxidized to CO₂ via carbonate. A comparison with reported results for Cu/Al₂O₃ this catalyst is promising, yielding high level of H₂ with little CO production during reforming and partial oxidation reaction. The maximum H₂ formation for the partial oxidation of ethanol was 41% at ratio (O₂/Et) 0.8, increasing to 50% at ratio 1.5. The H₂/CO is around 10 for the partial oxidation and 7 for steam reforming, which is excellent, compared to the Ni/Al₂O₃ catalyst with a factor 4–8 lower.