| 引入误差情况下的环板齿轮有限元接触分析 |
| |
| 引用本文： | 廖洪富. 引入误差情况下的环板齿轮有限元接触分析[J]. 现代制造工程, 2006, 0(1): 77-80 |
| |
| 作者姓名： | 廖洪富 |
| |
| 作者单位： | 攀钢集团设计研究院有限公司,攀枝花,617023 |
| |
| 摘 要： | 考虑部分制造误差及安装的影响,对环板内齿的啮合传动进行了传动误差分析,将误差引入环板轮齿的实体建模中,建立考虑误差的环板内齿接触有限元计算模型,并在额定工况下,用建立的模型进行有限元接触分析,分析误差及载荷变化对齿轮接触齿对的影响,指出载荷不均是造成减速器振动的因素。
|
| 关 键 词： | 误差 有限元 环式减速器 接触分析 |
| 文章编号： | 1671-3133(2006)01-0077-04 |
| 修稿时间： | 2005-08-15 |
Finite element analysis of inner teeth contact of plate under considering error condition |
| |
| Liao Hongfu. Finite element analysis of inner teeth contact of plate under considering error condition[J]. Modern Manufacturing Engineering, 2006, 0(1): 77-80 |
| |
| Authors: | Liao Hongfu |
| |
| Abstract: | Considering manufacturing errors and assembling influence,analyze the transmission error of inner teeth meshing,establish finite element model of inner teeth contact of plate,which take error into account.And carry out finite element analysis under rating power by using the established models,therefore,discuss the influence of error and variable load on contacting teeth,and point out vibration factors caused by unbalanced load. |
| |
| Keywords: | Error Double ring reducer Finite element Contact analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
