High temperature properties of rubberized binders containing warm asphalt additives |
| |
Authors: | Chandra K. Akisetty Soon-Jae Lee Serji N. Amirkhanian |
| |
Affiliation: | Department of Civil Engineering, Clemson University, Clemson, SC 29634-0911, United States |
| |
Abstract: | Several studies have been conducted evaluating the properties of warm mix asphalt (WMA), and it is observed that warm asphalt additives work in different ways to either reduce the viscosity of the binder or to allow better workability of the mix at lower temperatures. In terms of rubberized asphalt mixtures, they are compacted at a higher temperature than conventional mixtures, based on the field experience. If the technologies of warm mix asphalt are incorporated, it is expected to reduce the mixing and compaction temperatures of rubberized asphalt mixtures to those of conventional mixtures. This paper presents the high temperature properties of rubberized binders containing warm asphalt additives. Rubberized binders were produced at 10% by binder weight using five binder sources, and the binders with the additives were produced using two (i.e. Aspha-min® and Sasobit®) of the available processes and artificially short-term aged through the rolling thin film oven (RTFO) method. Tests were conducted on the binders using the rotational viscometer and the Dynamic Shear Rheometer. The results indicated that the viscosity properties of rubberized binders can be changed significantly through the use of warm asphalt additives. Also, the addition of the additives was found to improve rutting resistance of the rubberized binders. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|